© 2014 VAN OS MEDICAL UK Ltd., Excel House, 2 Ashbrooke Park
, Lincoln Way, Sherburn in Elmet,North Yorkshire, LS25 6P
Tel. +44-(0)1904-720170, Fax +44-(0)1904-720398,
E-mail: sales@vanosmedical.com, www.vanosmedical.com
info@vanosmedical.nl, www.vanosmedical.com
8 PROBLEM ANYLYSIS AND SOLUTIONS
Your Excel Mobil wheelchair is inspected and adjusted so that you can use it
immediately. Continual use necessitates maintenance, especially if the factory set
adjustments have been altered.
The following troubleshooting guide, lists several common problems that may occur
and offers corrective actions for each.
Tip
We recommend the use of only Van Os Medical UK Ltd replacement parts. If
you do not use original parts, the warranty will be expired.
The wheelchair moves to heavy
POSSIBLE CAUSE AND CORRECT SOLUTION
Check if all nuts and bolts are tightly stuck.
Rear wheels and/or castors may be adjusted improperly. Make
sure that both rear wheels and castor are mounted in identical
positions.
Check if the bearings are not worn.
Castor forks may be adjusted improperly. Make sure they are
adjusted properly.
To Next Page
Loading...
