Excelsior-HENDERSON Super X 1999 User Manual

6999-0006 Rev. A
Forward
6999-0006 Rev. A
All text, photographs, and illustrations in this handbook are based on the most current
product information available at the time of publication. Product improvements or other
changes may result in differences between this handbook and the motorcycle.
Excelsior-Henderson reserves the right to make production changes at any time, without
notice and without incurring any obligation to make the same or similar changes to
motorcycles previously built.
EXCELSIOR-HENDERSON MOTORCYCLE MANUFACTURING COMPANY
805 HANLON DRIVE • BELLE PLAINE, MINNESOTA 56011 • TELE: 612.873.7000/FAX: 612.873.7030
Copyright© 1999 Excelsior-Henderson Motorcycle Manufacturing Company. All rights reserved.
Excelsior-Henderson , the X & Bar logo,
Super X, and Rider’s Handbook are trademarks of the Excelsior-Henderson Motorcycle Manufacturing Company. Dunlop is a registered
trademark of the Dunlop Tire Corporation.
RiderCourse is a registered trademark of the Motorcycle Safety Foundation.

Excelsior-HENDERSON Super X 1999 Specifications

General

Brand	Excelsior-HENDERSON
Model	Super X 1999
Category	Motorcycle
Language	English

Summary

Forward

Introduction to Vehicle Setup

Provides an overview of the handbook's purpose and introduces dealer support and special terms.

1. Vehicle Setup

Unpacking and Initial Inspection

Safely open the crate, remove the motorcycle, and perform an initial visual check for damage.

Battery, Fluids, and Controls Setup

Install battery, check fluid levels (brake, clutch), adjust throttle, mirrors, and steering.

Wheels, Drive Belt, and Engine Systems

Inspect tires, spokes, suspension, check drive belt tension, and verify engine oil and fuel levels.

Electrical Systems and Operational Testing

Check main switch, indicators, electrical components, start engine, and perform operational tests.

Road Test and Technical Specifications

Guidelines for the road test, gear shifting, and review of Super X technical specifications.

2. Owner Predelivery

Literature Kit and Initial Owner Orientation

Present and discuss essential literature, including warnings and riding tips, with the new owner.

Motorcycle Inspection and Control Adjustments

Perform visual inspection, check instruments, adjust rear suspension, and guide operator control adjustments.

Key Information and Maintenance Guidance

Record key identification, explain pre-operation checks, and inform about break-in and service schedules.

Final Owner Delivery Procedures

Review dust cover, 500-mile service, and provide final orientation to ensure a smooth handover.