MAINTENANCE AND CLEANING
STEP 1
Turn off the unit and unplug it. Wait at
least 30 mins until the unit cools down
completely.
STEP 2
Unscrew the Drain Plug and empty the
water reservoir. Collapse and remove the
Telescopic Pole & Steam Nozzle.
REMOVING MINERAL BUILD-UP
STEP 1
Turn off and unplug the unit and cool for
at least 30mins. Remove water tank. Mix
water & vinegar solution and pour into
water tank.
STEP 2
Wait for 40mins, unscrew the Drain Plug
and drain the water reservoir. Pour clean
water into reservoir and let it drain. After
the reservoir is empty, replace and tight-
en the Drain Plug.
Attention: Tighten the Drain
Plug back into place after
water reservoir is emptied.
Make sure Drain Plug is
tightly secured each time
before use.
Vinegar
Water
Clean water
To Next Page
Loading...