Adjusting Power Level
Adjusting the Volume
5
With this option, you may adjust power levels quickly. We
recommend you to adopt low power for battery saving. However,
if you cannot communicate with radios located at a distant place
with low power, please select high power.
You may press the programmed Adjust Power Level key to
adjust power levels.
Selecting a Zone
A zone is a group of channels exhibiting the same property. The
radio supports 32 zones and each zone contains 128 channels
at most.
You can select a zone through any of the following methods.
● Selecting a Zone through Menu
Procedure:
1. In the home screen, press the Menu key to enter the main
menu.
2. Go to “Settings -> Zone”.
3. Use the Up/Down key to go to a desired zone.
4. Press OK key to select the zone.
Selecting a Zone via Programmable Button●
You may quickly toggle to your desired zone by pressing the
programmed Zone Up or Zone Down key.
Selecting a Channel
After turning the radio on, rotate the Channel Selector knob to
select a needed channel. You can also switch to the designated
channel by pressing the Preset Channel key.
If the Channel Notify function is active, you will hear the
corresponding channel number when switching to any channel.
After turning the radio on, rotate the Radio On-Off/Volume
Control knob clockwise to increase the call volume, or
counterclockwise to decrease it.
To Next Page
Loading...
