Excera ER9000 User Manual

35 pages

Questions and Answers:

S
Sarah NelsonAug 9, 2025
Why Excera Repeater group members cannot talk to each other, or the repeater cannot communicate with a subscriber radio?
- L
  lpaulAug 9, 2025
  There might be several reasons: * The TX/RX frequency of the repeater is inconsistent with that of portable/mobile terminals. In this case, reset frequencies. * There is a strong interference signal, which makes it impossible to repeat a useful signal. If you cannot remove or bypass the interference source, change frequencies or operate at other frequencies. * The group member is out of the coverage of the repeater. Try to go within the coverage area.
S
suarezkimberlyAug 17, 2025
What to do if my Excera ER9000 Repeater has short communication range or poor audio?
- T
  Timothy SchultzAug 17, 2025
  Several factors could be the reason for this issue: * There is leakage of signal energy due to damaged connection cable. Replace the cable with a new one if necessary. * There is a loose connection between the antenna connector and the cable, or loss of connection. Secure or replace the cable. * There is invisible damage of cable. Replace the cable with a new one. * The duplexer is not properly set (if the duplexer is mounted). Contact the manufacturer or your dealer to reset the duplexer.

Excera ER9000 Specifications

General

Brand	Excera
Model	ER9000
Category	Repeater
Language	English

Related product manuals

Preview: Excera ER9000 VHF

Excera ER9000 VHF