SAFETY INSTRUCTIONS
Do not remove the front metal grille which protects the loudspeaker; avoid touching if
with any serviceable parts to prevent any irreparable damage
Do not use solvents such as acetone or alcohol to clean the system,as they would
damage its finish.
Avoid exposing the system to the action of atmospheric agents for a long time
(dampness, excessive heat, strong temperature variations, etc.)
Clean the system once in a while to avoid excessive dust; when possible protect the
system inside its original packaging for any transport purpose
Suspending this system should be done by qualified persons following safe rigging
standards.
WARNING
Never plug in jacks with signal running into the speaker or cable.
FEATURES
Enclosure adopted a high impact polymer, injection molded shaping. It has high intensity
and light weight, set a handle, easy to carry it. Designed non-symmetrical enclosure
outline. It can be used for fold-back speaker.
Woofer speaker make a high powered pro-speaker. It has wide-range, low distortion,
high sensitivity, adopted a aluminium frame. It has non-mechanical resonance.
Driver selected a titanium diaphragm, and light mass voice coil, make it high frequency
reached 18,000Hz.
Crossover adopted a high quality polypropylene condenser, flame proof resistor, low less
inductance. Precision design dividing frequency and smooth frequency response, and
designed auto-limit protection circuit to avoid damage driver.
To Next Page
Loading...