To Next PageTo Next Page
Need help?Do you have a question about the Exhausto VEX4000 and is the answer not in the manual?
Describes the VEX4000's applications, sizes, and configuration via EXselect Pro.
Introduces diagrams of various unit configurations and their components.
Covers site, surface, and duct system requirements for installation.
Details checking for damage, delivery contents, and unit assembly types.
Covers general handling, forklift, crane, and base lifting methods.
Provides guidance on unpacking and storing units indoors or outdoors.
Outlines the main steps for assembling the VEX unit.
Details base assembly, section positioning, and fitting methods.
Covers inspection hatches and coil removal procedures.
Explains establishing condensation outlets and water traps.
Details connecting the water heating coil.
States that work must be by an authorised electrician.
Refers to power consumption data from the calculation program.
Discusses isolation switches, fuses, and recommendations for installation.
Mentions minimum and maximum short-circuit current values.
Lists the sequential steps for starting up the air handling unit.
Details the specific start-up sequence for the fans.
Explains how to calculate airflow and measure filter pressure drop.
Provides technical specifications for MVM motor valves.
Mentions the availability of pressure drop curves.
Discusses unit disassembly and material recycling.
General| Brand | Exhausto |
|---|---|
| Model | VEX4000 |
| Category | Air Handlers |
| Language | English |
