Exile X2400.1 - User Manual

ENG
FR
Amplifier Manual
Manuel de l’amplificateur
Models: X300.2, X600.2, X600.4, X800.4
X400.1, X600.1, X1200.1, X2400.1
© 2007 Exile Car Audio • www.exileaudio.com Amplifier Manual
EASY CLICK TECHNOLOGY
Easy Click technology is our commitment to making our products easy to use and ultra
accurate for the professional or DIY installer. All crossover frequency potentiometers have
41 detents or “clicks” so the end user can set the exact cross over frequency desired.
For example, turn the potentiometer 10 clicks for exactly 100Hz. No more turning the
potentiometer and guessing where your crossover points are. You get exact control of your
amplifier’s output.
FORCE TECHNOLOGY
FORCE technology is our commitment to making our products with bullet proof reliability.
All of our power and speaker terminals are solid, direct insert connectors for maximum
current transfer and easy installation. All amplifiers feature robust power supplies for
maximum power. The output stage of our two and four channel models feature audiophile
Bi-Polar Transistors in a Triple Darlington circuit, instead of the cheap MOSFET alternatives.
The circuit boards are also overbuilt with numerous buss bars, excessive capacitors, and
two layer/two ounce copper in the higher power units. These are just a few small details
that illustrate how over building and designing the amplifier today, will guarantee it will
continue to play tomorrow and beyond.
STRAP TECHNOLOGY
STRAP technology is our commitment to making our amplifiers deliver high output for
street or SPL competitions. The X2400.1 and X1200.1 feature STRAP technology. This
means two X2400.1 can be “strapped” together for about 5000 watts into a single voice
coil. If you have a dual voice coil, then you can strap 4 X2400.1’s for 10,000 watts into a
single driver!!!!
TECHNOLOGIE EASY CLICK
La technologie Easy Click est notre engagement à rendre nos produits simples à utiliser
et extrêmement précis pour l’installateur professionnel comme pour le néophyte. Tous les
potentiomètres servant à régler la fréquence du filtre passif ont 41 crans ou «clics» de manière
à ce que l’utilisateur final puisse régler avec exactitude la fréquence de filtre passif souhaitée.
Par exemple, tournez le potentiomètre de 10 clics pour régler précisément 100 Hz. Vous ne
devez plus tourner le potentiomètre et deviner où sont les points de filtre. Vous obtenez un
contrôle précis de la sortie de votre amplificateur.
TECHNOLOGIE FORCE
La technologie FORCE est notre engagement à offrir à nos produits une fiabilité à toute
épreuve. Toutes nos bornes de haut-parleur et de puissance sont des connecteurs à insertion
directe résistants pour un transfert de courant maximum et une installation simplifiée. Tous
les amplificateurs intègrent des blocs d’alimentation robustes pour une puissance maximale.
Le niveau de sortie de nos modèles à deux et quatre canaux comprend des transistors
bipolaires audiophiles dans un circuit Triple Darlington au lieu des alternatives MOSFET meilleur
marché. Les circuits imprimés sont également suréquipés de nombreuses barres de bus, de
nombreux condensateurs et de cuivre deux couches/deux onces dans les unités d’alimentation
supérieures. Il ne s’agit là que de quelques petits détails qui illustrent comment la construction
et la conception de l’amplificateur garantissent aujourd’hui qu’il continuera à fonctionner
demain et à l’avenir.
TECHNOLOGIE STRAP
La technologie STRAP est notre engagement à faire en sorte que nos amplificateurs fournissent
une sortie élevée pour les compétitions de rue ou de niveau sonore. Les modèles X2400.1 et
X1200.1 intègrent la technologie STRAP. Cela signifie que deux X2400.1 peuvent être «groupés»
pour fournir environ 5 000 Watts dans une seule bobine mobile. Si vous avez une double bobine
mobile, vous pouvez alors regrouper 4 X2400.1 pour obtenir 10 000 Watts dans un seul circuit
d’attaque !!!!

Summary

Key Technologies

Easy Click Technology

Enables precise setting of crossover frequencies using 41 detents for accurate control.

Force Technology

Ensures bulletproof reliability with robust power supplies, direct connectors, and audiophile components.

Strap Technology

Allows linking amplifiers for higher output in competitions, e.g., 5000W for X2400.1.

Exile Philosophy

Company Vision

Founded by industry veterans, focusing on fewer, high-performance products engineered in the USA.

Amplifier Specifications

Monoblock Specifications

Detailed technical specs for monoblock amplifiers including frequency response, SNR, crossovers, and power outputs.

Two and Four Channel Specifications

Technical specs for 2 and 4 channel amplifiers covering frequency response, SNR, crossovers, and power outputs.

2 Channel Amplifier Operation

Input and Output Terminals

Explains how to connect preamp signals to the input terminals and use the output for additional amplifiers.

Crossover and Bass Controls

Details the LPF/HPF crossover frequency adjustments and the remote bass level control port.

Gain and Crossover Select

Explains the GAIN control for power adjustment and the CROSSOVER SELECT switch for signal routing.

Power and Speaker Connections

Describes connections for 12V+, REMOTE, GND, and SPEAKER OUTPUTS, including impedance.

4 Channel Amplifier Operation

Input;Output and Crossover Controls

Covers input/output connections, LPF/HPF crossover adjustments, and Bass Boost for rear channels.

Mode and Remote Bass Control

Explains the 2ch/4ch mode setting and the remote bass level control port for rear channels.

Gain and Crossover Select Switch

Details the GAIN control for power adjustment and the CROSSOVER SELECT switch for signal routing.

Power and Speaker Terminals

Guides on connecting 12V+, REMOTE, GND, and SPEAKER OUTPUTS for front and rear channels.

Monoblock Amplifier Controls (X400.1-X600.1)

Input, Output, and LPF Crossover

Describes connecting preamp signals, using the output terminal, and adjusting the LPF crossover frequency.

Bass Boost and Remote Level Control

Explains the variable bass boost and the remote bass level control port for volume adjustment.

Gain and Subsonic Crossover

Covers the GAIN control for maximum power and the SUBSONIC CROSSOVER FREQUENCY.

Power and Speaker Connections

Details the 12V+, REMOTE, GND, and SPEAKER OUTPUT connections, including impedance and wire size.

Monoblock Amplifier Controls (X1200.1-X2400.1)

Input, Output, and Crossover Settings

Explains input/output connections, LPF crossover frequency, and STRAP technology setup.

Bass Boost and Remote Controls

Details the variable bass boost and the remote bass level control port for volume adjustment.

Gain and Subsonic Crossover

Covers the GAIN control for power adjustment and the SUBSONIC CROSSOVER FREQUENCY for low-frequency elimination.

Power and Speaker Terminals

Guides on connecting 12V+, REMOTE, GND, and SPEAKER OUTPUTS, including impedance.

System Tuning Guide

Initial Setup and Gain Adjustment

Steps for setting fuses, sensitivity, routing switches, and adjusting gain for optimal undistorted output.

Crossover and Volume Adjustment

Guidance on setting crossover frequencies, headunit volume, and fine-tuning levels for system balance.

Final Checks and Blending

Steps for listening to music, checking system balance, blending speakers, and adjusting bass equalization.

Crossover Frequency Charts

Monoblock Crossover Settings

Tables showing click-to-frequency mapping for Subsonic and LPF crossovers on monoblock amplifiers.

2;4 Channel Crossover Settings

Tables detailing HPF and LPF crossover frequency settings for 2 and 4 channel amplifiers.

Strap Technology Implementation

Amplifier Linking Setup

Illustrates wiring two amplifiers (e.g., X2400.1) using OUTPUT MASTER and INPUT SLAVE for increased power.

Speaker Connection for Strapped Amps

Details connecting the speaker terminals of strapped amplifiers to a single voice coil for maximum output.

Frequently Asked Questions & Installation

Removable Parts and Weight

Information on removable endcaps/badges and why amplifiers are heavy (heatsink mass).

Product Information and Support

Where to find more information about Exile products online.

Installation Details Record

Fields to record owner, serial number, vehicle, purchase date, and installer information.

Warranty and Product Information

Limited Warranty Details

Covers warranty period, coverage, and claims process for the product within the USA.

Product Origin and Contact

States the product is designed and engineered in the USA and provides contact information.

Exile X2400.1 Specifications

General

Brand	Exile
Model	X2400.1
Category	Amplifier
Language	English