10
Custom keys
11
Charging /
Adapter Port
12
13
Low Battery
Warning
Standby
Protection
Charge the remote control or connect with a mobile
device
S/N
Key / Switch Function
Low battery warning for remote control： Remote
control“Beeps”
<25%, di~di~, interval 10s
<15%, di~di~, interval 2s
<10%, didi~didi~, interval 1s
If Remote controller is left on and unused, it will start
beeping once every 3 seconds and switch to stand by
mode. After 3 minutes of beeping, remote control will
automatically shut down
Long press the Fn+ wheel to adjust the zoom function.
Press and hold the Photo+ wheel to adjust the brightness
of the remote control screen.
When the drone is not taking off, press the Fn button and
the Video button for more than 3 seconds to activate the
remote control code pairing operation.
The remote control buzzer beeps when a low battery is
triggered or Return to home is activated. Press the Fn
button for 1.5 seconds, to stop beeping prompts.
Long press the Fn button again 1.5 seconds to restart the
beeping prompts.
Custom keys, set the function on the app and save it.
When the EXO Pro app is not connected, [short press] Fn
won't work.
Function one: Exit the current flight mode.
In this mode, short press Fn to exit the current flight
mode and the aircraft will hover.
Function two: short press Fn to execute gimbal return to
normal state.
Function three: no function (factory default function)
10
14
Low
power mode
When the battery power of the remote controller is less
than 10%, the remote controller enters the low power
consumption mode. Meanwhile the remote controller will
cut off the power supply of USB Host. The communi-
cation between the mobile phone and the remote
controller will be cut off, but between the remote control-
ler and the aircraft will not be affected.
To Previous Page
Loading...