Need help?Do you have a question about the Expolite tourled and is the answer not in the manual?
General| Brand | Expolite |
|---|---|
| Model | tourled |
| Category | Light Fixture |
| Language | English |
Details technical specifications of the LED modules, including type, voltage, temperature, weight, dimensions, power, and IP rating.
Outlines critical safety precautions for installation, maintenance, and operation, including electrical safety and eye protection.
Describes fixture mounting methods for hanging or upright positions, emphasizing safety cable use.
Specifies connecting multiple units in series for 220V and 120V inputs.
Explains how to connect and configure units using a DMX512 controller, including address setting.
Details how to navigate the fixture's display using MENU, ENTER, UP, and DOWN buttons.
Provides a visual overview of the menu structure and available functions within the fixture's interface.
Guides users on how to manually set static colors by adjusting Red, Green, Blue, and Strobe values.
Explains how to select and activate pre-programmed automatic light shows or effects.
Describes how to set the fixture's operating mode, such as DMX or Master/Slave.
Details how to access and set the DMX address for each fixture.
Allows selection of different DMX personality configurations (e.g., TOUR, TR16, ARC.1).
Guides on creating and editing custom light scenes by defining steps with color, strobe, and time parameters.
Covers advanced settings such as uploading custom programs, resetting defaults, color calibration, dimming speeds, and signal error handling.
Details how to adjust white balance and color parameters, including pre-programmed white points and RGB adjustments.
Explains how to enable or disable the access password for the fixture's settings menu.
Lists DMX channel assignments for configurations like TOUR, TR16, ARC.1, AR1.d, AR1.S, and HSV.
Illustrates fixture components with a numbered list of parts and their corresponding names.
To Next Page
