Need help?Do you have a question about the Expondo STAMOS S-MIGMA 250.IGBT and is the answer not in the manual?
Covers general safety notes, qualified personnel, and preparation for welding work site to prevent hazards.
Details PPE, electrical shock prevention, gas/fume hazards, and residual voltage warnings for safe operation.
Outlines general operational guidelines, warranty, positioning advice, and recommendations for device storage.
Provides instructions for connecting the power supply, ensuring proper earthing, and electrical safety compliance.
Step-by-step instructions for connecting cables for MMA, TIG, MIG, and Flux welding modes.
Procedures for cleaning, maintaining, regularly checking the device, and troubleshooting issues.
Guidelines for transporting, storing the device safely, and proper disposal of packaging and old equipment.
General| Input Voltage | 230 V |
|---|---|
| Input Current | 16 A |
| Output Current Range | 30 - 250 A |
| Output Current | 250 A |
| Duty Cycle | 60% |
| Welding Processes | MIG/MAG, MMA, TIG |
| Welding Wire Diameter | 0.6 - 1.0 mm |
| Protection Class | IP21S |
| Type | MIG/MAG |
| Duty Cycle at | 60% at 250A |
To Next Page