What to do if my Exquisit WK 3602 wei doesn’t work?
If your Exquisit Kettle isn't working, consider these points: - Ensure the plug is fully inserted into the socket. - Check that the water container is correctly positioned on the base. - The dry-run protection feature might have been triggered. Please refer to the section on Dry-run protection for guidance.
What to do if Exquisit WK 3602 wei doesn't switch off?
If your Exquisit Kettle doesn't switch off after boiling, take these steps: 1. Manually switch the kettle off by pressing the On/Off switch upwards. 2. Allow the kettle to cool down completely. 3. Verify that the lid is properly closed and engaged.
Why does my Exquisit Kettle take so long to boil?
The extended boiling time in your Exquisit Kettle might be due to the need for decalcification. Please consult the chapter on Decalcification for instructions.
How to remove stains on the bottom of Exquisit WK 3602 wei?
The stains on the bottom of your Exquisit Kettle's water container are likely calcareous deposits. While harmless, they should be removed regularly. Refer to the chapter on Decalcification for guidance on how to do this.
What to do if only a little water comes out of my Exquisit WK 3602 wei Kettle?
If only a small amount of water is coming out of your Exquisit Kettle, the strainer insert in front of the spout may be dirty. Clean the strainer insert to resolve this issue.
To Next Page
General