8-line Digital I/O to Ethernet Adapter
14
This digital I/O Adapter can work in ether Straight IP mode or Virtual
COM Port mode. The Straight IP mode will be accessed through its
TCP/IP socket port directly. The Virtual COM Port mode allows it
treated as a COM port by installing the CentosSEC Virtual COM Port
driver.
The Virtual COM Port software, CentosSEC, is an advanced software
to map your serial port devices (COM ports) to Ethernet so they could
be accessed from anywhere in the world (via Internet or LAN) as if it is
attached directly to the remote PC. When the attached serial port
device (or digital I/O Adapter) sends communication data it is
actually transmitted over TCP/IP network and back from the network
to your device.
After installed, the driver allows Windows platform software, using
standard API calls, to be used in an Ethernet application.
Installing CentosSEC
1. Run the Centos_Setup.exe setup program on the supplied CD, it
was shipped in the following folder:
6. Using Virtual COM Port Drivers
DI_0 is grounded to 0
Released
DI_1 is grounded to 0
Released
DI_2 is grounded to 0
Released
DI_3 is grounded to 0
Released
To Next Page
Loading...
