Battery Replacement
Use a coin to remove the battery compartment cover on the rear of the meter. Replace the 2032
lithium battery; install the new battery face up (+) in the battery compartment.
You, as the end user, are legally bound (Battery ordinance) to return all used batteries
and accumulators; disposal in the household garbage is prohibited!
You can hand over your used batteries / accumulators at collection points in your
community or wherever batteries / accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
Specifications
Relative Humidity Sensor High Precision thin-film capacitance type
Temperature Range -10 to 50
o
C (14 to 122
o
F)
Relative Humidity Range 10 to 90% Relative Humidity
Resolution Temperature: 0.1
o
; Relative Humidity: 0.1%
Accuracy (32 to 122
o
F & 0 to 50
o
C) Temperature: ±1.0
o
C (±1.8
o
F); RH: ±5%
Power 2032 button battery (150 hour battery life)
Response time 120 seconds
Dimensions 175 x 42 x 16mm (6.9 x 1.6 x 0.6")
Copyright©2013FLIRSystems,Inc.
Allrightsreservedincludingtherightofreproductioninwholeorinpartinanyform
ISO‐9001Certified
To Previous Page
Loading...
Need help?
General
