Need help?Do you have a question about the Extraflame Preziosa Steel and is the answer not in the manual?
General| Brand | Extraflame |
|---|---|
| Model | Preziosa Steel |
| Category | Pellet stove |
| Language | English |
Guidelines for storing pellets to ensure proper combustion.
Instructions on how to load pellets into the stove.
What happens if the warm air blower stops functioning.
What happens if the fume exhauster stops functioning.
What happens if the pellet feed motor stops functioning.
Information on what to do if the lighting process fails.
How the appliance behaves during and after a power outage.
Information on the stove's protection against electrical fluctuations.
Safety measures related to the exhaust system failure.
Safety device that blocks operation in case of overheating in the hopper.
Definitions of key terms used in installation instructions.
General guidelines and checks before starting installation.
Conditions and requirements for acceptable installation locations.
Types of installations or environments that are forbidden.
Instructions for connecting the stove to the exhaust system.
Specific requirements for exhaust channels and pipes.
Requirements for chimneys and single flues.
How to connect to the flue and vent combustion products.
Requirements and positioning for the chimney cap.
How to connect external air intakes for proper operation.
Material requirements and safety measures for surrounding elements.
Importance of adhering to local laws and regulations.
Details on heat distribution for the Divina Plus model.
Details on heat distribution for the Tosca Plus model.
Steps for installing the Comfort Maxi insert on an existing fireplace.
Instructions for installing the insert using an optional pedestal.
Procedures for removing the insert for maintenance or servicing.
How to attach and fit the decorative frames.
Requirements for air recirculation pipes for proper functioning.
Description and functions of the control panel buttons and displays.
Procedure for setting the current time and day.
Basic instructions and recommendations for initial stove use.
Step-by-step guide for lighting the stove.
How to operate the stove during normal use.
Procedure for safely shutting down the stove.
How to use the included digital thermostat for temperature control.
Information on optional mechanical thermostat installation.
Steps for installing an optional mechanical thermostat.
How to use the standby function with a mechanical thermostat.
How a thermostat controls the heat distribution motor on Divina Plus.
How to set up the weekly heating schedule.
How to set different temperatures for day and night.
Adjusting the pellet feed rate for optimal burning.
Parameters for controlling the heat distribution motor.
Cleaning procedures specific to Ecologica and Comfort Maxi models.
Cleaning procedures for Bella, Duchessa, Contessa, Clementina, Divina, and Tosca Plus models.
Cleaning procedures for Babyfiamma, Preziosa, Karolina, Isabella, Graziosa, and Rosy models.
Cleaning procedures for Falò 1XLP, 1CP, 2CP, and Esmeralda models.
Information about the burn pot partition and its effect.
Maintenance and cleaning of the chimney connection.
Explanation of normal operating messages and their solutions.
Details of alarm messages, their causes, and solutions.
Meaning and description of the LED indicator lights on the control panel.
Conditions under which the warranty is valid and not valid.
Additional clauses and exclusions related to the warranty.
How to request service covered by the warranty.
Statement of Extraflame S.p.A.'s liability.
Specifies the competent court for any disputes.
Details of documents required for warranty service.
To Next Page