ipe-2200ax-T and ipe-2200ax-F – Installation in a Rack
www.extremenetworks.com | 3
Assembling the Outer Rails
Each outer rail comes in two sections that must be assembled before mounting onto the rack.
1. Identify the left and right outer rails by examining the ends, which bend outward. Match the left
front outer rail with the left rear outer rail and the same for the right rails.
2. Align the round post in the rear rail (B) with the round hole at the end of the slot in the front rail
(A) and slide the front section into the rear section.
To Next Page
Loading...