Extreme Networks Summit WM3000 Series - Page 158

Network Setup
Summit WM3000 Series Controller System Reference Guide158
4 Use the Add button (within the List Configuration field) to add more than one device to the WLAN.
You can create 32 lists (both include and exclude combined together) and 64 MAC entries per list.
For more information, see “Configuring Devices on the Include List” on page 158.
5 The Configured WLANs field displays available WLANs. Associate a list item (within the Include
Lists field) with as many WLANs as required.
For information on mapping NAC Include list items with WLANs, see “Mapping Include List Items
to WLANs” on page 159.
6 To delete a device (and its configuration), select it from the Include Lists and click the Delete button
7 Use the Edit button in the List Configuration section to modify the devices parameters.
8 To delete any list configuration for a particular device, select the row from the List Configuration
section and click on the Delete button.
Adding an Include List to a WLAN
To add a device to a WLAN’s include list configuration:
1 Select Network > Wireless LANs from the main menu tree.
2 Select the NAC Include tab to view and configure NAC Include enabled devices.
3 Click on the Add button in the Include Lists area.
4 Enter the name of the device to include for NAC authentication.
5 Refer to the Status field. It displays the current state of the requests made from the applet. Requests
are any “SET/GET” operation from the applet. The Status field displays error messages if something
goes wrong in the transaction between the applet and the controller.
6 Click OK to save the new configuration and close the dialog window.
7 Click Cancel to close the dialog without committing updates to the running configuration.
Configuring Devices on the Include List
To add a multiple number of devices for a single device type:
1 Select Network > Wireless LANs from the main menu tree.
2 Select the NAC Include tab to view and configure all the NAC Include enabled devices.
3 Click on the Add button within the List Configuration area.