Summit WM3000 Series Controller System Reference Guide 159
The List Name field displays the name of the device list used. This parameter is read-only.
4 Enter the Host Name for the device you wish to add.
5 Enter a valid MAC Address of the device you wish to add.
6 Optionally, enter the MAC Mask for the device you wish to add.
7 Refer to the Status field. It displays the current state of the requests made from the applet. Requests
are any “SET/GET” operation from the applet. The Status field displays error messages if something
goes wrong in the transaction between the applet and the controller.
8 Click OK to save and add the new configuration and close the dialog window.
9 Click Cancel to close the dialog without committing updates to the running configuration.
Mapping Include List Items to WLANs
To assign include list items to a one or more WLANs:
1 Select Network > Wireless LANs from the main menu tree.
2 Select the NAC Include tab to view NAC Included devices.
3 Select an item from the Include List’s List Name field and click the Edit button (within the Configured
WLANs field).
To Next Page
Loading...