Network Setup
Summit WM3000 Series Controller System Reference Guide198
The ECW Max is combined with the ECW Min to make the Contention Window. From this range, a
random number is selected for the back off mechanism. Lower values are used for higher priority
(video or voice) traffic.
8 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
9 Click OK to use the changes to the running configuration and close the dialog.
10 Click Cancel to close the dialog without committing updates to the running configuration.
Configuring Access Point Radio Bandwidth
Refer to the Bandwidth tab to view the QoS weight associated with each radio when added to a WLAN.
The weight represents the controller priority assigned to the traffic transmitted from the radio for the
WLAN.
For information on revising the weight assigned to each radio in respect to its intended operation
within its assigned WLAN, see “Editing the WLAN Configuration” on page 113.
To view existing radio bandwidth weight settings:
1 Select Network > Access Point Radios from the main menu tree.
2 Click the Bandwidth tab.
Bandwidth information displays per radio with the following data:
Viewing Mesh Statistics
To view Mesh Statistics:
1 Select Network > Access Point Radios from the main menu tree.
2 Click the Mesh Statistics tab.
Index
The Index is the numerical index (device identifier) used with the device
radio. Use this index (along with the radio name) to differentiate the radio
from other device radios.
Description
The displayed name is the name used with the device radio. Use this
name (along with the radio index) to differentiate the radio from other
device radios.
QoS Weight
Displays the Quality of Service weight for the AP. The default value for
the weight is 1. AP QoS will be applied based on the QoS weight value
with the higher values given priority.
To Next Page
Loading...