Summit WM3000 Series Controller System Reference Guide 199
3 Click the Last 30s radio button to display Mesh statistics for the last 30 seconds. This option is
helpful when troubleshooting issues as they actually occur.
4 Click the Last Hr radio button to displays Mesh statistics for the last 1 hour. This metric is helpful in
baselining events over a one hour interval.
.
5 The following statistics are displayed:
Mesh Index
Displays the numerical identifier assigned to each mesh member AP.
MAC Address
Displays the
Media Access Control
(MAC) address for each Access Point.
Connection Type
Displays the connection type for each Access Point.
Radio Index
The Radio Index is a numerical value assigned to the radio as a unique
identifier. For example; 1, 2, or 3. The index is helpful for differentiating
radios of similar type and configuration.
Type
Displays the radio type of the corresponding APs. Available type are:
• 802.11a
• 802.11an
• 802.11bg
• 802.11bgn
Associated WLAN
Displays the WLAN that each Access Point is associated to.
Throughput Mbps
Throughput Mbps is the average throughput in Mbps on the selected
Access Point.
ABS
Average Mbps is the average throughput in Mbps on the selected Access
Point.
To Next Page
Loading...