Extreme Networks Summit WM3000 Series - Page 353

Summit WM3000 Series Controller System Reference Guide 353
5 When all logging options have been modified, click the Apply button to commit those changes to the
controller.
6 To undo any changes and go back to the previously saved logging options, click the Revert button.
Reviewing Firewall and ACL Statistics
Use the Statistics tab to view set of statistics for ACL, DHCP Snoop Entry and Role based firewalls.
Reviewing ACL Statistics
To review ACL statistics:
1 Select Security > Wireless Firewall from the main menu tree.
2 Click the Statistics tab.
3 From the Statistics section select the Statistics tab.
ARP Log
The
ARP Log field displays the level of Syslog logging enabled for
excessive ARP on an interface. The logging level uses standard Syslog
levels of:
• Emergency
• Alert
• Critical
• Error
• Warning
• Notice
• Info
• Debug
• None
To change the logging level, click on the specific field and choose the
logging level from the drop-down menu.
Broadcast Log
The
Broadcast Log field displays the level of syslog logging enabled for
excessive broadcasts on an interface. The logging level uses the same
standard Syslog levels.
To change the logging level, click on the specific field and choose the
logging level from the drop-down menu.
Multicast Log
The
Multicast Log field displays the level of syslog logging enabled for
excessive multicast on an interface. The logging level uses the same
standard Syslog levels. To change the logging level, click on the specific
field and choose the logging level from the drop-down menu.
Unknown Unicast
Log
The
Unknown Unicast Log field displays the level of syslog logging
enabled for excessive unknown unicasts on an interface. The logging level
uses the same standard Syslog levels. To change the logging level, click
on the specific field and choose the logging level from the drop-down
menu.