Controller Security
Summit WM3000 Series Controller System Reference Guide354
4 Refer to the following information as displayed within the Statistics tab:
5 Select an interface and click the Details button to display a more robust set of statistics for the
selected interface.
6 Click the Export to export the selected ACL attribute to a user specified location.
Interface
Interface displays the physical/virtual interfaces used to add the ACL
association to the controller.
Action
Displays the permit, deny or mark designation for the ACL. If the action
is to mark, the packet is tagged for priority.
Protocol
Displays the permit, deny or mark designation for the ACL. If the action
is to mark, the packet is tagged for priority or
type of service
.
Low Source IP
Displays the Low Source IP Address from where the packets are sourced.
High Source IP
Displays the High Source (highest address in available range) IP Address
from where the packets are sourced.
Low Destination IP
Displays the Low Destination (lowest address in available range) IP
Address.
High Destination IP
Displays the High Destination IP Address.
Packets In
Displays the number of packets (in bytes) transmitted over the ACL.
Packets Out
Displays the number of instances this ACL has been used. Periodically
review to determine whether specific ACLs should be deleted or modified
to make relevant.
To Next Page
Loading...