Controller Web UI Access and Image Upgrades
Summit WM3000 Series Controller System Reference Guide36
2 Launch your web browser.
In the address bar, type http://10.1.1.100. The Summit WM GUI login screen is displayed.
3 Enter the Username admin, and Password admin123. Both are case-sensitive. Click the Login button.
Once the Web UI is accessed, the controller main menu item displays a configuration tab with high-level
controller information. Click the Show Dashboard button to display an overall indicator of controller
health. Once the controller is fully configured, the dashboard is the central display for the user to view
the version of firmware running on the controller, quickly assess the last 5 alarms generated by the
controller, view the status of the controller’s Ethernet connections and view controller CPU and memory
utilization statistics.
Defining Basic Controller Settings
When initially logging into the system, the controller requests that you enter the correct country code
for your region. If a country code is not configured, a warning message displays stating that an
incorrect country setting will lead to the illegal use of the controller. Each country has its own
regulatory restrictions concerning electromagnetic emissions (channel range) and the maximum RF
signal strength transmitted. To ensure compliance with national and local laws, be sure to set the
Country correctly. In addition to the country, you need to initially set several other controller settings to
ensure it can be optimally deployed.
To Next Page
Loading...