Summit WM3000 Series Controller System Reference Guide 437
3 Refer to the following information for thresholds descriptions, conditions, editable threshold values
and units of measurement.
Threshold Name
(Description)
Displays the target metric for the data displayed to the right of the item.
It defines a performance criteria used as a target for trap configuration.
Threshold Conditions
Displays the criteria used for generating a trap for the specific event. The
Threshold conditions appear as greater than, less then or worse then and
define a baseline for trap generation.
Threshold values for:
MU
Displays a threshold value for associated MUs. Use the
Threshold Name
and
Threshold Conditions
as input criteria to define an appropriate
Threshold Value unique to the MUs within the network. For information
on specific values, see “Wireless Trap Threshold Values” on page 438.
Threshold values for:
AP
Set a threshold value for adopted APs. Use the
Threshold Name
and
Threshold Conditions
as input criteria to define an appropriate Threshold
Value unique to the APs within the network. For information on specific
values, see “Wireless Trap Threshold Values” on page 438.
Threshold values for:
WLAN
Use the
Threshold Name
and
Threshold Conditions
as input criteria to
define an appropriate Threshold Value unique to the controller. For
information on specific values, see “Wireless Trap Threshold Values” on
page 438.
Threshold values for:
Controller
Use the
Threshold Name
and
Threshold Conditions
as input criteria to
define an appropriate Threshold Value unique to the controller. For
information on specific values, see “Wireless Trap Threshold Values” on
page 438.
To Next Page
Loading...