Extreme Networks Summit WM3000 Series - Page 443

Summit WM3000 Series Controller System Reference Guide 443
1 Select Management Access > Users from the main menu tree.
2 Click the Local Users tab.
The Local User window consists of 2 fields:
● Users – Displays the users currently authorized to use the controller. By default, the controller has
two default user types, Admin and Operator.
● Privileges – This frame displays the privileges assigned to different type of user.
3 Select the user (Admin, Operator or user defined) from the Users frame. The Privilege frame displays
the rights authorized to the user.
4 Click on the Edit button to modify the associated roles and access modes of the selected user. By
default, the controller has two default users – Admin and Operator. Admin’s role is that of a
superuser and Operator the role will be monitored (read only).
5 Click on Add button to add and assign rights to a new user.
6 Click on Delete button to delete the selected user from the Users frame.
Creating a New Local User
Local users are those users connected directly into the controller and do not require any sort of
configurable remote connection.
To create a new local user:
1 Select Management Access > Users from the main menu tree.
2 Click the Add button within the Local Users tab.