Extreme Networks Summit WM3000 Series - Power over Ethernet (PoE)

Summit WM3000 Series Controller System Reference Guide 61
● Input Bytes
● Input Pkts Dropped
● Output Pkts Total
● Output Pkts Error
● Input Pkts Total
● Input Pkts Error
● Output Pkts NUCast
● Input Pkts NUCast
● Output Bytes
● Output Pkts Dropped
3 Display any of the above by selecting the checkbox associated with it.
NOTE
You are not allowed to select (display) more than four parameters at any given time.
4 Click on the Close button to exit out of the screen.
Power over Ethernet (PoE)
NOTE
Power over Ethernet is only supported on the Summit WM3600 controller. The following information only applies to
the Summit WM3600 controller.
The Summit WM3600 controller supports 802.3af Power over Ethernet (PoE) on each of its eight ge ports.
The PoE screen allows users to monitor the power consumption of the ports and configure power usage
limits and priorities for each of the ge ports.
To view the PoE configuration:
1 Select Controller > Port from the main menu tree.
2 Select the PoE tab