Controller Information
Summit WM3000 Series Controller System Reference Guide62
The PoE screen is only available on the WM3600 controller. The Summit WM3700 controller does not have
Power over Ethernet on any ports and will not display the PoE tab.
The PoE Global Configuration section displays the following power information.
If you have modified the Power Usage Threshold for Sending Trap value, click the Apply button to save the
changes.
Power Budget
Displays the total watts available for Power over Ethernet on the
controller.
Power Consumption
Displays the total watts in use by Power over Ethernet on the controller.
Power Usage
Threshold for
Sending Trap
Specify a percentage of power usage as the threshold before the
controller sends an SNMP trap. The percentage is a percentage of the
total power budget of the controller.
Port
Displays the port name for each of the PoE capable ports.
PoE
Displays the PoE status of each PoE capable port. Status will display Up
when PoE is available on the port and Down when PoE is unavailable on
the port.
To Next Page
Loading...