Controller Information
Summit WM3000 Series Controller System Reference Guide68
4 Refer to the Status field for the current state of the requests made from the applet. Requests are any
“SET/GET” operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the controller.
5 Click the Refresh button to get the most recent updated version of the configuration file.
6 Click Close to close the dialog without committing updates to the running configuration.
Transferring a Config File
Transfer a configuration file to and from the controller using the Tran sf er screen. Transferring the
controller configuration is recommended to keep viable configurations available in a secure location.
The following file transfer configurations are possible:
● controller to controller, server or local disk
● server to controller
● local disk to controller
To transfer the contents of a configuration file:
1 Click the Transfer Files button on the bottom of the Configuration screen.
2 Refer to the Source field to define the location and address information for the source config file.
3 Refer to the Target field to specify the details of the target file.
4 Refer to the Status field for the current state of the requests made from the applet. Requests are any
“SET/GET” operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the controller.
5 Click the Transfer button when ready to move the target file to the specified location. Repeat the
process as necessary to move each desired configuration file to the specified location.
From
Select the location representing the source file’s current location using
the
From
drop-down menu. Options include
Server, Local Disk
and
Controller
.
File
Specify a source file for the file transfer. If the controller is selected, the
file used at startup automatically displays within the File parameter.
Using
Refer to the
Using
drop down-menu to configure whether the log file
transfer is conducted using FTP or TFTP. FTP transfers require a valid
user ID and password.
IP Address
Enter the
IP Address
of the server or system receiving the source
configuration. Ensure the IP address is valid or risk jeopardizing the
success of the file transfer.
User ID
Enter the
User ID
credentials required to transfer the configuration file
from a FTP server.
Password
Enter the
Password
required to send the configuration file from an FTP
server.
Path
Specify an appropriate
Path
name to the target directory on the local
system disk or server. The Target options are different depending on the
target selected.
To
Use the
To
drop-down menu to define the location of the configuration
file. Options include the controller (default location), external server or
local disk.
File
Use the
File
field to specify a target file for the file transfer. Use the File
Browser icon to search attached files systems for target file location.
To Next Page
Loading...