Summit WM3000 Series Controller System Reference Guide 69
6 Click the Abort button to cancel the file transfer process before it is complete.
7 Click the Close button to exit the Transfer screen and return to the Config Files screen. Once a file is
transferred, there is nothing else to be saved within the Transfer screen.
Viewing Controller Firmware Information
The controller can store (retain) two software versions (primary and secondary). Information supporting
the two versions displays within the Firmware screen. The Version column displays the version string.
The Build Time is the date and time each version was generated. Install represents the date and time the
upgrade was performed. Next Boot indicates which version should be used on the next reboot. The Next
Boot version should match the Running Version, unless the system has failed over to another version.
To view the firmware files available to the controller:
1 Select Controller > Firmware from the main menu tree.
2 Refer to the following information displayed within the Firmware screen:
Image
Displays whether a firmware image is the primary image or a secondary
image. The primary image is typically the image loaded when the
controller boots.
Version
Displays a unique alphanumeric version for each firmware file listed.
To Next Page
Loading...