Controller Information
Summit WM3000 Series Controller System Reference Guide84
3 Click the Install button to install the selected license.
4 Refer to the Feature Licenses table for the following license specific information:
How to use the Filter Option
Use the Filter Option to sort the display details of screen that employ the filtering option as a means of
sorting how data is displayed within the screen.
1 Click the Show Filtering Option to expand the Filter Option zone, whenever it appears in any screen.
2 Enter the filter criteria as per the options provided in the Filter Option zone.
The parameters in the Filter Option field are populated with the parameters of the screen in which it
appears. Not all screens contain the filtering option.
3 Click the Filter Entire Table button to filter the entire table in which the filter zone appears.
The result of the filtering operation displays at the bottom of the table
4 Click the Turn Off Filtering button to disable the filtering option for the screen where it appears.
Filtering status (when filtering is turned off) displays at the bottom of the table.
5 Click the Hide Filtering Option button to hide the Filter Option zone.
License Key
Enter the license key required to install a particular feature. The license
key is returned when you supply the controller serial number to Extreme
Networks support.
Feature Name
Enter the name of the feature you wish to install/upgrade using the
license.
Serial Number
Displays the serial number of the controller used for generating the
license key.
Feature Name
Displays the name of the feature either installed or upgraded on the
controller.
License Count
Displays the number of licenses applied while entering the license key.
License Usage
Lists the number of license in use. Determine whether this number
adequately represents the number of controllers needed to deploy.
License Key
The license key for the feature installed/upgraded.
To Next Page
Loading...