Battery Information
Battery voltage is measured at every 30 seconds and is reported in the next Beacon (OID
Custom Beacon and Eddystone TLM) or within the scan response.
Note: Device will stop operation at 1.8V.
7.1 Battery Types:
• iTAGXB10 - Sense Lite V2 – Panasonic CR3032 (replaceable) – 225 mAH
• iTAGXB20 - Sense Badge – HCB/ Fanso CP304544 – 1.3 AH
• iTAGXB30 - Sense Asset – HCB/Fanso CP502440 – 1.2 AH
• iTAGXB40 - Sense Ultra - 2x replaceable Saft LS145000 3.6v 2.6 Ah
To Next Page
Loading...