Need help?Do you have a question about the Exyz printing da Vinci Jr.2.0 Mix and is the answer not in the manual?
General| Brand | Exyz printing |
|---|---|
| Model | da Vinci Jr.2.0 Mix |
| Category | 3D Printers |
| Language | English |
Guides through initial setup: removing materials, connecting PC, bed tape, SD card.
Lists critical safety warnings for printer operation and placement.
Detailed step-by-step guide for safely unpacking the 3D printer.
Step-by-step guide for attaching the filament guide tube and extruder.
Instructions for preparing the filament spool and axle assembly.
Detailed steps for correctly inserting filament into the feed port and module.
Process for automatic filament loading via the printer interface.
Steps for manually feeding filament through the guide tube to the module.
Procedure for safely removing filament from the printer.
Explains the function of each physical button on the printer's interface.
Moves the extruder and print bed to their default starting positions.
Allows manual control and movement of the extruder and print bed.
Steps to activate and perform print bed calibration.
Steps to clean carbon deposits and filament dust from the nozzle.
Instructions for adjusting the gap between nozzle and print bed for first layer adhesion.
Detailed steps for naming the printer and scanning for access points.
Provides solutions for common service codes and symptoms.
Lists essential warnings for safe operation, placement, and handling of the printer.
To Next Page