Eyedro EYEDRO-HOME - User Manual

Revision: 230628
PRODUCT GUIDE:
EYEDRO-HOME AND
EYEDRO5-EHEM1
SINGLE-PHASE ELECTRICITY
MONITORING SYSTEM

Summary

Introduction to Eyedro Monitoring System

Overview of Eyedro System

Provides a general introduction to the Eyedro Electricity Monitoring System and its benefits.

Eyedro Monitoring System Safety Guidelines

Important Safety Precautions

Critical safety precautions for using Eyedro monitoring products indoors and handling components.

Additional Safety Precautions

Further safety precautions for electrical wiring, sensor installation, and handling live wires.

Eyedro Product Components and Hardware Installation

Product Package Contents

Lists components included for EYEDRO-HOME and EYEDRO5-EHEM1 models.

EYEDRO-HOME Package Contents

Details the specific items included in the EYEDRO-HOME package.

EYEDRO5-EHEM1 Package Contents

Details the specific items included in the EYEDRO5-EHEM1 package.

Hardware Installation Guide

Guides users through the physical installation process of the Eyedro monitoring system.

Locating Electrical Service Points

Explains how to identify appropriate locations for electrical service connections.

Electrical Service Panel Types

Describes common configurations for service boxes and distribution panels.

Installing Current Sensors

Step-by-step instructions for installing current sensors on electrical wires.

Alternate Circuit Monitoring Procedures

Outlines alternative installation scenarios for monitoring different circuits.

Branch Circuit Monitoring Guide

Explains monitoring individual branch circuits for lighting and receptacles.

Balanced Branch Circuit Monitoring

Guides monitoring of balanced branch circuits for large appliances.

Unbalanced Branch Circuit Monitoring

Details monitoring of unbalanced circuits, often for 240V loads.

Mounting the Eyedro Device

Instructions for physically mounting the Eyedro monitoring module.

Vertical Device Mounting Procedure

Step-by-step guide for mounting the Eyedro device vertically.

Horizontal Device Mounting Procedure

Instructions for horizontal mounting of the Eyedro device, typically on a shelf.

Connecting System Cables

Procedures for connecting the Eyedro system's Ethernet and power cables.

Ethernet Connection Procedure

Steps for connecting the device using an Ethernet cable.

Wi-Fi Connection Procedure

Steps for connecting the device wirelessly via Wi-Fi.

Eyedro Network and Software Configuration

Internet Connection Requirements

Requirements and considerations for establishing an internet connection for the Eyedro system.

Provisioning Eyedro-Home Wi-Fi

Step-by-step guide for connecting the EYEDRO-HOME to a Wi-Fi network.

Wi-Fi Setup Procedure

Detailed steps for provisioning Wi-Fi connectivity for Eyedro devices.

Wi-Fi Status and Tips

Provides helpful hints and status light indicators for Wi-Fi setup.

MyEyedro Cloud Service Configuration

Guidance on configuring the Eyedro system using the MyEyedro cloud service.

Accessing MyEyedro.com

Instructions for accessing and using the MyEyedro online platform for data management.

Eyedro Technical Specifications and Compliance

Hardware Specifications

Details technical specifications for the Eyedro hardware.

EYEDRO-HOME Hardware Details

Lists the hardware specifications for the EYEDRO-HOME model.

EYEDRO5-EHEM1 Hardware Details

Lists the hardware specifications for the EYEDRO5-EHEM1 model.

Current Sensor Specifications

Provides detailed specifications for the 200A current sensors.

Product Regulatory Compliance

Lists the safety and regulatory compliance standards met by the product.

Eyedro Support and Warranty

Limited One Year Warranty

Outlines the terms and conditions of the one-year limited warranty for the product.

Troubleshooting System Issues

Offers resources and guidance for resolving common issues with the Eyedro system.

Contact and Support Resources

Provides contact details and website resources for support and further information.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

The Eyedro Electricity Monitoring System is a non-invasive device designed to help users understand and manage their electricity consumption in real-time. It provides a comprehensive solution for monitoring electrical usage in both homes and businesses, offering insights that can lead to energy savings, cost reductions, and peace of mind. The system is available in two main configurations: the EYEDRO-HOME, which offers both Ethernet and Wi-Fi connectivity, and the EYEDRO5-EHEM1, which provides Ethernet connectivity only.

Function Description

The core function of the Eyedro Electricity Monitoring System is to measure electrical current supplied to a building and compute the power consumed. This is achieved through the use of current sensors that clip onto the live electrical cables. The system's non-invasive design means that, in most cases, there is no need to disconnect any electrical cabling during installation, making it relatively easy to set up.

Once installed, the Eyedro device continuously collects data on electricity usage. This data is then stored on a remote cloud server 24 hours a day, 7 days a week, 365 days a year. This cloud-based storage eliminates concerns about data loss or running out of storage space, ensuring that historical data is always accessible.

The system is designed to provide real-time monitoring, allowing users to see their electricity consumption as it happens. This immediate feedback is crucial for identifying energy waste and understanding the impact of various appliances and habits on overall usage. The data collected by the Eyedro device is then made available through the MyEyedro cloud service, which serves as the primary interface for users.

Usage Features

The MyEyedro cloud service is a central component of the Eyedro Electricity Monitoring System, providing a user-friendly platform for accessing and analyzing electricity usage and cost information. MyEyedro automatically and securely stores data in the cloud, making it accessible from anywhere with an internet connection, whether at home, at work, or on the go.

Key usage features of the MyEyedro platform include:

• Responsive Real-time Graphs: Users can view their electricity consumption in real-time through dynamic and easy-to-understand graphs. This visual representation helps in quickly grasping current usage patterns.
• Hourly/Daily/Weekly/Monthly Cost Estimates: The system provides estimated electricity costs based on usage data, allowing users to track their expenses over different timeframes. This feature helps in budgeting and identifying periods of high expenditure.
• Comparisons and Estimates: MyEyedro enables users to compare their current usage with historical data or with estimated benchmarks. This helps in understanding trends and the effectiveness of energy-saving efforts. The system can also predict total electricity bills, aiding in financial planning.
• Configurable Reports: Users can generate customizable reports based on their electricity data. These reports can be tailored to specific needs, offering detailed insights into consumption patterns and potential areas for improvement.
• Mobile Accessibility: The easy-to-use interface is accessible through a standard web browser, including those on mobile phones. This allows users to monitor their electricity usage on the go and even conduct "walk-through" audits by switching appliances on and off to observe their impact on consumption.

The Eyedro system supports various monitoring applications:

• Service Entrance Monitoring: The most common application involves monitoring the main electrical service entrance of a building. Current sensors are installed on the individual line (live/hot) wires within the electrical panel or junction box.
• Branch Circuit Monitoring: For more granular insights, the system can monitor individual branch circuits, which typically supply lighting and receptacles. One sensor is required for each branch circuit, installed on the line wire (typically black).
• Balanced Branch Circuit Monitoring: For large appliances and other balanced loads in split-phase electrical services (e.g., electric heaters, water heaters), one sensor is installed on either line wire (typically black or red) of the double-pole breaker circuit. These circuits typically do not have neutral conductors.
• Unbalanced Branch Circuit Monitoring: For unbalanced circuits with both 120V and 240V components (e.g., stoves, electric dryers, sub-panels), two sensors are required, installed on both line wires (typically black and red) of the double-pole breaker circuit.

The system is designed to be scalable, making it suitable for a wide range of residential and commercial applications. For three-phase installations, Eyedro Business (ExB*) products are recommended, though details for these are outside the scope of this particular guide.

Maintenance Features

The Eyedro Electricity Monitoring System is designed for minimal maintenance, focusing on reliability and ease of use.

• Non-User Serviceable: The Eyedro monitoring products and all their components are explicitly stated as NOT USER SERVICEABLE. This means users should not attempt to open the case of the unit, tamper with internal or external components, or repair the product themselves. Any perceived damage or fault should be reported to Eyedro Green Solutions Inc.
• Durable Design: The devices are designed for indoor use only and should be installed within a suitable building or panel. To ensure longevity, users are advised not to subject the unit or sensors to excessive temperature, humidity, force, shock, or dust. They should also avoid immersing the unit in water or other liquids. In case of a spill, power should be removed immediately, and the unit should be cleaned and allowed to dry completely before attempting further use.
• Self-Healing Connectivity: In the event of a temporary disruption to the internet service, the Eyedro device has a small amount of internal memory to store data, ensuring that usage information is not lost. For Wi-Fi devices, if the initial setup is unsuccessful, the device will recreate its own network, allowing users to re-attempt the provisioning process.
• Online Support and Troubleshooting: Eyedro provides extensive online resources for troubleshooting and support. This includes documentation, videos, frequently asked questions, and contact forms available on their website (eyedro.com). Specific troubleshooting guides are available for Wi-Fi connection issues and general device problems.
• Warranty: The product comes with a limited one-year warranty covering defects in material and workmanship from the original date of purchase. Defective parts may be repaired or replaced at the manufacturer's discretion, free of charge during this period. To maintain warranty validity, the product must be installed and operated strictly according to the provided instructions and operating conditions. Warranty claims require original proof of purchase and may request a photo of the product. Returns require a Return Material Authorization (RMA) number, which can be obtained through their support website. The warranty is void if the product has been tampered with or modified.

Overall, the Eyedro Electricity Monitoring System is a robust and user-friendly solution for gaining awareness and control over electricity consumption, with a strong emphasis on continuous data availability and accessible support.

Eyedro EYEDRO-HOME Specifications

General

Measurement Type	Electricity Usage
Connectivity	Wi-Fi
Compatibility	Compatible with most electrical panels
Data Logging	Yes
Voltage	120/240V
Real-time Monitoring	Yes
Historical Data	Yes
Type	Energy Monitor
Product Type	Electricity Monitor
Alerts	Yes, via mobile app and email
Power Source	AC power adapter
Data Access	Mobile app, web browser
Installation	DIY or Professional
Mobile App	Yes, iOS and Android