EZ Answer
The unit dials the extension and hangs up.
Enter 103 n where n = 0, 1 or 2
If any other value is entered, the unit will prompt the message
“This entry is invalid”.
Default value = 0
Length of entry = fixed 1 digit
Program # 143:
To listen to the currently programmed value for the Transfer type
You will hear: “ One Four Three (0.6 sec silence) Zero”
Program # 104:
To record the main greeting - EZ ANSWER has a default main
greeting already recorded in it. To record your message over this
default greeting, do as follows:
Enter 104 - You will hear a long tone. Begin speaking after the
tone. Press # to terminate the recording.
A main greeting of up to 50 seconds may be recorded. Once a
new greeting is recorded, restoring the factory default settings
cannot retrieve the default greeting.
Program # 144: To listen to main greeting
After the main greeting is played back, the unit will prompt with
Enter program number indicating that it is ready to accept the
next input.
17
To Next Page
Loading...