EZ Answer
end of the list of extensions already in memory. The unit inserts
a * between two extensions while storing in memory.
Length of entry = Total of 240 digits
Press # to terminate the programming
The unit will insert a * between two extensions while storing in
memory. Hence, the maximum numbers of valid extensions that
can be stored are:
80 extensions of 2 digits
or 60 extensions of 3 digits
or 48 extensions of 4 digits
or 40 extensions of 5 digits.
After all the available space for the valid extensions is used up, if
another extension is entered, the unit will prompt “This entry
is invalid” and return to the “Enter Program number”
prompt.
Note: If this programming is being done without listening to the
response-tones, appropriate pauses must be allowed between
successive extension entries. After an extension has been
entered, if another digit is entered before the
confirmation beeps, this last digit will be ignored.
Default value: 107 #
There are no default entries for this program.
Program # 147:
To listen to the currently programmed list of valid extensions:
You will hear: “One Four Seven (0.6 sec silence) One Two Three
21
To Next Page
Loading...