EZ Answer
enabled for digits 1, 4 and 8 only.
All the extensions that are entered here will be treated as Valid
extensions and will not be subject to the Invalid leading digit
check or the Invalid extension list check. The extension numbers
may also be repeated between the plans for different single digit
plans.
Default: None
All single digit plans are disabled by default.
Program # 149:
This program prompts the Single digit plan for all digits that
have been programmed.
You will hear (for the example on previous page) -
One Four Nine (0.6 sec silence) One (0.6 sec silence) One
Two Seven Star One Five Five (0.6 sec silence), Two (0.6 sec
silence) Two Nine One (0.6 sec silence) Four One Six (0.6 sec
silence) Three (0.6 sec silence) Two Zero One Star Four
seven Two
Program # 110:
Fax extensions : The user may program up to 3 extensions as
“Fax extensions”. These extensions may be of different lengths.
For example, you may enter 110 200 * 399 * 5001 #. To
disable the fax detection, enter # as the first character.
Press * to separate two extensions. Press # to terminate the
entry. At least 1 digit must be programmed. For example, the
entry 110 1 # is a valid entry.
When a call is routed to the EZ ANSWER, it will go off hook and
start playing the main greeting normally. However, if the
24
To Next Page
Loading...