EZ Answer
call, Port 2 will pick up the call after a total of 6 relay closures.
Program # 249:
To listen to the currently programmed value for the Overflow
Relay pickup code -
You will hear:
“ Two Four Nine (0.6 sec silence) Five Star Six Seven“
Program # 210:
Re-route on busy extension -
If an extension to which a caller requests a transfer returns a
busy signal, the caller will hear the prompt “I am sorry, that
room is busy. Please dial 0 for an Operator or try your call later.”
Now if the caller dials 0, the call will be transferred to this
alternate Reroute-on-busy extension.
Default value: 210 #
One extension of any length (max. 5 digits) may be
programmed as a Reroute-on-busy extension. If this is not
programmed, the call will be routed to the normal Operator
extension.
However, even if a Fully supervised mode has been selected, the
unit will not perform a `no answer' check on the reroute-on-
busy extension. The call will be transferred to the extension if it
returns a ring signal.
Program # 250:
To listen to the currently programmed value for the Re-route on
busy extension -
34
To Next Page
Loading...