EZ FLO EZ 1010-HB User Manual

AUTOMATIC FERTILIZING SYSTEM
GARDEN HOSE AND DRIP CONNECTION
INSTALLATION AND OPERATING GUIDE
Model: EZ 1010-HB
High Pressure Garden Hose & Drip Feeder
1 Gallon Liquid / 8LB Dry Capacity
CAUTION: Installing your system improperly can cause risk of water contamination
and pose health risks. Do not attach your feeder to a hose bib or sprinkler line that
does not have a hose vacuum breaker (pictured), anti-siphon device, or back flow
preventer. Back flow preventer is not included with system.
Do not install system in an irrigation mainline before a zone valve. Do not use if
pressure exceeds 100 PSI. Flush hose after each use to vent chemicals and
pressure. Empty tank when freezing conditions are present.
For additional information or to contact EZ-FLO go to our website
or call 866-393-5601 www.ezflofertilizing.com
www.ezflofertilizing.com © 2013, EZ-FLO Fertilizing Systems
TM

EZ FLO EZ 1010-HB Specifications

General

Brand	EZ FLO
Model	EZ 1010-HB
Category	Lawn and Garden Equipment
Language	English

Summary

Installation and Operating Guide

Safety Precautions

Warnings regarding water contamination, health risks, and necessary backflow preventers.

Installing Your EZ-FLO Garden Hose & Drip Systems

Determine Installation Type

Identify if the system is for hose or drip and insert the correct FLO disc.

Install Hose Bib Adapter

Install the EZ-FLO hose bib adapter correctly, before or after a timer.

Attach Tubing to Hose Bib Adapter

Connect black and clear tubing to the hose bib adapter fittings.

Attach Tubing to Tank Cap

Connect tubing to the green tank cap, ensuring nuts are correctly attached.

Flow Requirements for Low Flow Hose & Drip Systems

Estimate Water Flow and Select Flo-Disc

Calculate water flow and select the appropriate Flo-Disc for drip systems.

Install Flo-Disc

Adding Fertilizer & Feeding Settings

Add Product and Select Cap Setting

Fill Tank with Water

Connect Tubing to Cap and Adapter

Set Flow Adjustment and Feeding Rates