EZ-ON 101M2 - User Manual

101M2/M203
MODIFIED LAY DOWN VEST
IMPORTANT INFO
• Use for body casts, hip spica casts, braces and any other conguration where the passenger
must be transported laying down.
• M203 for passengers over 12 months old, weighing 22 – 75 lbs.
• 101M2 for passengers weighing 60 – 106 lbs.
• A layer of padding no thicker than 2” may be used under the passenger for added comfort.
• Can be secured by using lap type seat belts or shoulder/lap belts. No mount is needed.
• This is also a great product for sleeping children.
• REGISTER this transportation vest to be notied of a safety recall.
PINCH TEST PROCEDURE
THE PINCH TEST
Tighten vest so that no pinch in the webbing can be achieved on the chest strap.
When vest is snug ngers will be unable to grab any webbing.
INCORRECT
CORRECT
1-800-323-6598
www.ezonpro.com
EZ-ON PRODUCTS
1-800-323-6598
www.ezonpro.com
WARRANTY
EZ-ON Products stands behind the products we make. Warranty covers any defects in material or workmanships under
normal use during the warranty period. We will repair or replace product defects for 1 year from manufacturer date.
WARNING
Death or serious injury can occur If manufacturer’s instructions are not followed correctly.
All EZ-ON products are dynamically tested to meet NHTSA standards. Please follow washing
instructions on product tag. Replace product if it is damaged, frayed, or has been in a crash.
Recommended replacement after six years.
EZ-ON Products are not liable for injury if these recommendations are not followed.

Summary

Product Information and Safety

Important Information

Details on product usage, passenger weight limits, padding, and safety recall registration.

Warranty Policy

EZ-ON Products warranty covers defects for 1 year from manufacturer date.

Critical Safety Warnings

Warnings about potential injury if instructions are not followed, and product replacement recommendations.

Pinch Test Procedure

Procedure to ensure the vest is snug by checking for webbing pinch on the chest strap.

Installation Instructions

Securing Vest Onto Passenger

Step-by-step guide to placing and securing the vest on the passenger.

Securing Passenger to Rear Seat

Instructions for securing the passenger and vest using vehicle seat belts.

Using the Extremity Belt

Guidance on using the extremity belt for passengers with casts on their legs.

EZ-ON 101M2 Specifications

General

Switching Voltage	100 VDC
Switching Current	0.5A
Operating Voltage	12 VDC
Housing Material	ABS Plastic
Type	Magnetic Contact
Contact Form	Normally Closed (NC)
Material	Plastic