Need help?Do you have a question about the EZ TANKLESS ULTRA HE and is the answer not in the manual?
General| Brand | EZ TANKLESS |
|---|---|
| Model | ULTRA HE |
| Category | Heater |
| Language | English |
Details the scope of warranty coverage for defects in materials and workmanship.
Specifies the duration of coverage for heat exchanger, parts, components, and labor.
Outlines EZ Tankless's commitment to repair or replace defective products and parts.
Provides essential guidelines and warnings for the proper installation of the water heater.
Instructions for installing the gas pipe to the tankless water heater.
Guidance on the installation and venting requirements for the exhaust pipe.
Warns about the dangers of hot water and potential scalding hazards.
Provides immediate first aid steps for treating burns caused by hot water.
Instructions for powering the unit on and off, and initial display indication.
Guidance on setting the initial desired water temperature for the unit.
Specifies flow rate and pressure requirements for the water inlet source.
Recommendations for adjusting temperature settings when using mixing valves.
Addresses water pressure fluctuations in well systems and regulator settings.
Discusses freeze protection for basement installations and air buffer recommendations.
Explains issues with mixing valves and suggests temperature and flow rate adjustments.
Recommends using a surge protector for the unit's electronic components.
Steps for initial operation, including opening valves and plugging in the unit.
Explains the unit's display functions, temperature regulation, and flame indicators.
Details how to adjust water temperature using the control panel and available ranges.
Explains the 50-minute continuous operation shutdown and how to reset the unit.
Inspect the gas line and regulator for defects, especially concerning propane regulators.
Regularly inspect the exhaust vent for debris or blockages to prevent issues.
Instructions for cleaning the water inlet filter screen to remove sediment and debris.
Recommends flushing the unit with vinegar biannually to remove mineral buildup.
Addresses issues with inlet and outlet temperature probes, suggesting cleaning or replacement.
Covers false fire, ignition failures, and accidental flameouts due to gas or wiring.
Details errors related to limit switches, flue blockage, or fan malfunctions.
Covers high temperature protection and the 50-minute operation timeout.
To Next Page