Need help?Do you have a question about the EZ Way Smart Stand S400 and is the answer not in the manual?
Inspect all bolts for tightness, removing covers if necessary for inspection.
Verify the nut is tight and cotter pin is in place for the arm to mast pivot bolt.
Ensure foot platform assembly pins are not pushed in and engage into the base.
Inspect the bolts located on the back of the shin pad for tightness.
Confirm safety tabs are installed correctly, not missing, or torn.
Instructions for moving the arm by pressing and holding the directional key.
Procedures for capturing new weights and recalling previously saved weights.
Steps to enter and navigate the Customer Settings Menu/Weight Calibration.
Step-by-step guide for calibrating the stand's scale accurately.
Explains battery level indicators like 'CHARGE BATTERY' and 'SWAP BATTERY'.
Describes the 'Inspection Overdue' reminder for scheduled maintenance.
Details fault messages like 'Actuator Duty Cycle Fault' and 'Actuator Overload'.
Explains how the system detects actuator overload and how to override it.
Describes weight overload detection, its causes, and how to override it on scale units.
How to view real-time actuator current for diagnostic purposes.
How to monitor real-time battery voltage for diagnosing issues.
Overview of functions within the Customer Settings Menu, including reminders and diagnostics.
Details on the inspection reminder, its reset, and marking completion.
Explains the Overweight Counts function for tracking overload events on scale units.
Tracks accumulated actuator runtime for usage feedback, resettable by service.
Tracks occurrences of actuator overload for diagnostic feedback.
Tracks total lift/stand usage time, not reset on actuator replacement.
Monitors real-time battery voltage for diagnosing battery-related issues.
Tracks software version changes and updates for diagnostic purposes.
Solutions for troubleshooting when the machine fails to power on.
Steps to diagnose issues when the display works but the up/down function fails.
Solutions for addressing a continuous up/down movement problem.
General| Brand | EZ Way |
|---|---|
| Model | Smart Stand S400 |
| Category | Medical Equipment |
| Language | English |
To Next Page
