4
press record button before power on, then plug the USB-C power jack to power on the
device, after 3 seconds, the file number will start from 0.
Note: Sometimes you may find that some recorded video with problems, like: skip. It
may be because you are using a USB drive or Micro SD card in NTFS format, and you did
not click safety remove the device when disconnect from computer. You also can try to
format it to FAT32 if that problem keeps happen.
Update Firmware
Update firmware: you maybe need update firmware for some reason. Unplug USB-C
power jack to power off the device. Copy the firmware file in to USB drive or Micro SD
card, and plug it to device. Plug USB-C power jack to power on, the green indicator will
flash a few seconds, and be on, it means the updating is finished.
Specifications
To Next Page
Loading...
