EZCast Pro QuattroPod Lite

Need help?

Do you have a question about the EZCast Pro QuattroPod Lite and is the answer not in the manual?

Summary

Introduction to QuattroPod Lite

Configure QuattroPod Lite via Web Browser

Set up QuattroPod Lite

Receiver Setup Procedures

Connect receiver to power and display, then verify landing page.

Transmitter and Laptop Connection

Connect transmitters to receiver's USB and pair laptop.

Connect to QuattroPod Lite

Direct Connection

Guides on establishing a direct connection to the QuattroPod Lite via Wi-Fi.

Router Connection

Instructions for connecting the QuattroPod Lite to a 5GHz Wi-Fi router.

Web Setting Home Page

QuattroPod Lite Configuration

Network and Wi-Fi Setup

Manages network settings, including connecting to a 5GHz Wi-Fi router.

Wi-Fi Memory and Device Settings

Configures Wi-Fi memory, language, and video output resolution.

Resolution Mode and Display Options

Selects resolution application mode and display aspect ratio adjustments.

Display Modes and Device Features

Covers display modes, reboot timers, and one-touch play functionality.

Admin Settings

Wi-Fi Channel Configuration

Configures the Wi-Fi channel, country, and bandwidth for optimal performance.

SSID Management and Visibility

Customize the Wi-Fi network name (SSID), hide it, or turn it off.

Password, Sketch, and CMS Control

Manages Wi-Fi password, enables sketch, and controls CMS discoverability.

Landing Page and Dynamic Wallpaper Settings

Customizes landing page image and configures dynamic wallpaper display.

AirView Functionality

AirView Controls and CMS Access

Toggles AirView on/off, sets refresh rate, and enables CMS screenshot capability.

Admin Password and Screen Saver Settings

Firmware Upgrade

Reboot and Factory Reset Procedures

Component-Specific Reset Options

Resets the Receiver, Transmitter, or both to factory default settings.

About Device Information