Ezee-On 1225 - Offset Disc Pre-Delivery Inspection; Warranty Registration; Items for Dealership technician to inspect prior to delivery; Warranty Registration

Offset Disc Pre-Delivery Inspection/ Warranty Registration
Dealer Name ___________________________________ Location __________________Delivery Date: ___.____.____
m m dd yyyy
Model _________________ Width __________ Serial #______________________ New Machine  Demo
Unit
Items for Dealership technician to inspect prior to delivery:
 Torque all wheel bolts/ lug nuts to specifications  Check Operator’s Manual to ensure all decals are correctly installed
 Check tire pressures are correct. (Affects leveling process)  Connect Disc to tractor with a suitable pin and then lift the hitch jack
 Level machine. Refer to Operator’s Manual for detailed instructions  Check hydraulic hoses are leak free and hydraulic cylinders are filled with
oil
 Lubricate the entire machine as recommended in the Operator’s Manual  Adjust mounted harrows as required (if equipped)
 Check tightness of all bolts  Check lateral (side-to-side) settings of front & rear gangs and hitch tongue
 Check the correct # of depth stops are installed on mounting bar. (5)  Check all electrical components and connections
(*Model 8550 Offset takes (8) depth stops)
Set front and rear gangs at medium angle  Check operation of safety lights to ensure they function properly
 Adjust scrapers so they come into contact with blades  Ensure hydraulic lockout valves function properly
Pre-Delivery completed by _____________________________________(signature) Date _____/_____/_____
mm dd yyyy
Items for Dealership staff to discuss with customer upon delivery:
 Give the Operator’s Manual to your customer  Connect hydraulics, wiring harness, safety chain, etc.
 Inform your customer of all safety precautions, maintenance  Ensure machine functions properly. (Fold/Unfold, no leaks, lights work, etc)
procedures, and proper operation of the Disc  Take the Disc to a field (preferably where the ground is level, if possible) and
 Verify correct serial number perform all required leveling adjustments. Follow the Operator’s Manual
 Attach Disc to tractor  Explain warranty and fill out registration
 Ensure hitch jack is in transport position  Start tractor and run all controls so your customer understands the correct
operation of the Disc and ensure all functions of the Disc are working properly
Warranty Registration
Owner’s Name ____________________________ Address __________________________ Town___________________
Province/ State____________________________ Country __________________ Postal/ Zip Code___________________
Home Phone #______________________ Cell Phone #__________________ Email Address _______________________
*The owner hereby acknowledges receipt of the Operator’s Manual and that all delivery checks have been completed as listed above. Owner furthermore
acknowledges that the Operator’s Manual is an integral part of the purchased equipment and it contains information important to the proper operation,
maintenance, and safety procedures of this machine.
Owner’s signature __________________________________________________ Date ____/_____/_______
mm dd yyyy
Dealer’s signature __________________________________________________ Date ____/_____/_______
mm dd yyyy
Mail or Fax the original copy of this Warranty Registration and Pre-Delivery/Delivery Inspection to Ezee-On Manufacturing immediately after delivery.
Warranty Registration is mandatory. Failure to complete and return this form will delay the processing of warranty claims
5110 – 62
nd
Street
Vegreville, AB T9C 1N6
Canada
Ph: (780) 632-2126
Fx: (780) 632-6221
www.ezeeon.com