How to set the date and time?
1. Stop the recording during the video mode.
3. Use Down button to find the option of Date
4. Press up/down button to select the right figure. Press the menu button to select the next block. Press OK to save and quit.
Why the unit power on / off automatically?
Charge the battery, if the battery is not enough voltage, the unit is not be powered on .
Why the unit can not record any more?
Make sure the TF card is in good condition.
Make sure the TF card is Class 10 at least.
Why the unit can not read my TF card?
The maximum capacity of the unit is 32GB.
How to use the reverse camera feature?
Make sure the red wire on the extension cable is connected to the reverse bulb wire.
To Next Page