Do you have a question about the Ezviz C8C and is the answer not in the manual?
Noise reduction | Yes |
---|---|
Total megapixels | - MP |
Maximum resolution | 1920 x 1080 pixels |
Supported video modes | 1080p |
Video compression formats | H.264, H.265 |
Noise reduction technology | 3D noise reduction |
Type | IP security camera |
Antenna type | External |
Placement supported | Outdoor |
Connectivity technology | Wired & Wireless |
Form factor | Spherical |
Mounting type | Ceiling/Wall/Pole |
Product color | White |
Protection features | Dust resistant, Snow resistant, Water resistant |
International Protection (IP) code | IP65 |
Built-in HDD | No |
Compatible memory cards | MicroSD (TransFlash) |
Maximum memory card size | 256 GB |
Pan range | 0 - 352 ° |
Tilt angle range | 0 - 95 ° |
Minimum illumination | 0 lx |
Security algorithms | 64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
LED type | IR |
Sensor type | CMOS |
Number of sensors | 1 |
Optical sensor size | 1/2.7 \ |
Number of lenses | - |
Fixed focal length | 4 mm |
Maximum aperture number | 1.6 |
Frequency band | 2.4 - 2.4835 GHz |
Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Streaming method | Multicast |
Wi-Fi data rate (max) | 72 Mbit/s |
Ethernet interface type | Fast Ethernet |
Number of simultaneous live view channels | 2 channels |
Operating temperature (T-T) | -30 - 60 °C |
Operating relative humidity (H-H) | 0 - 95 % |
DC output current | 1 A |
DC output voltage | 12 |
Power source type | DC |
Power consumption (typical) | 6 W |
Lens mount interface | M12 |
Sustainability certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, WEEE |
Depth | 157 mm |
---|---|
Width | 158 mm |
Height | 149 mm |
Weight | 510 g |
Package depth | 185 mm |
Package width | 197 mm |
Package height | 205 mm |
Package weight | 885 g |
Provides status information through color and blinking patterns.
Used to restart the device and restore factory settings.
Connect the power adapter to the camera and then to the electrical outlet.
Connect the camera to the internet via Wi-Fi or Ethernet.
Download and install the EZVIZ app from App Store or Google Play Store.
Add your camera to the EZVIZ app for management and control.
Connect wirelessly by scanning the QR code within the EZVIZ app.
Connect the camera to the router's LAN port using an Ethernet cable.
Install the microSD card into the camera slot and initialize it via the app.
Mount the camera using screws and wall plugs on a suitable surface.
Fix the camera base to a pole using a cable tie.
Install the gasket kit for outdoor or humid environments for water protection.