Need help?Do you have a question about the Ezviz C3A and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Day/night mode | Yes |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wireless |
| Motion sensor technology | Passive infrared (PIR) sensor |
| LED type | IR |
| Night vision distance | 7.5 m |
| Form factor | - |
| Mounting type | Wall |
| Product color | Black, Silver |
| Protection features | Dust resistant |
| International Protection (IP) code | IP65 |
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video compression formats | H.264 |
| Audio system | 2-way |
| Compatible memory cards | MicroSD (TransFlash), SD |
| Maximum memory card size | 128 GB |
| AC input voltage | 100 - 240 V |
| Battery capacity | 5500 mAh |
| DC output current | 1 A |
| DC output voltage | 5 |
| Power source type | AC, Battery |
| AC input frequency | 50 - 60 Hz |
| Battery technology | Lithium |
| Number of sensors | 1 |
| Optical sensor size | 1/4 \ |
| Frequency band | 2.4 GHz |
| Operating temperature (T-T) | -20 - 45 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Fixed focal length | 2.2 mm |
| Minimum illumination | - lx |
| Field of view (FOV) angle | 126 ° |
Weight and Dimensions| Depth | 70 mm |
|---|---|
| Width | 56 mm |
| Height | 92 mm |
| Weight | 215 g |
Instructions for charging the device battery using a charging station, power adapter, or solar panel.
Steps to create an EZVIZ account and link the base station and cameras via the app.
Confirms base station connection to the network and transitions to device setup.
Process of adding and synchronizing cameras to the base station using the app and sync buttons.
Confirms successful synchronization of cameras and provides troubleshooting for sync failures.
To Next Page
