Ezviz C3A User Manual

5
Chapter 3 Connect Your Base
Station to the Internet
The base station connects to your home network and allows you to view your camera
videos from anywhere.
1. Connect the power cable to the power adapter.
2. Connect the power adaptor to an indoor electrical outlet (5V 2A).
Figure 3-1 Power on the Base Station
Note:
The circular LED indicator (SYNC Button) turns solid blue, when the base station is started
up.
3. Connect the base station to an open LAN port on your router using the included
Ethernet cable.
Figure 3-2 Connect the Base Station to the Network
Note:
The circular LED indicator (SYNC Button) turns solid green, when the base station is
connected to the network.

Ezviz C3A Specifications

General

Type	IP security camera
Day/night mode	Yes
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Motion sensor technology	Passive infrared (PIR) sensor
LED type	IR
Night vision distance	7.5 m
Form factor	-
Mounting type	Wall
Product color	Black, Silver
Protection features	Dust resistant
International Protection (IP) code	IP65
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Video compression formats	H.264
Audio system	2-way
Compatible memory cards	MicroSD (TransFlash), SD
Maximum memory card size	128 GB
AC input voltage	100 - 240 V
Battery capacity	5500 mAh
DC output current	1 A
DC output voltage	5
Power source type	AC, Battery
AC input frequency	50 - 60 Hz
Battery technology	Lithium
Number of sensors	1
Optical sensor size	1/4 \
Frequency band	2.4 GHz
Operating temperature (T-T)	-20 - 45 °C
Operating relative humidity (H-H)	0 - 95 %
Fixed focal length	2.2 mm
Minimum illumination	- lx
Field of view (FOV) angle	126 °

Weight and Dimensions

Depth	70 mm
Width	56 mm
Height	92 mm
Weight	215 g