Ezviz H4 - Reset Button Functionality; LED Indicator Status Meanings; Data Port Usage Explained; Micro SD Card Slot

2
Micro SD Card Slot
Power Port
Data Port
RESET Button
Name Description
RESET
Button
When the camera is working, press and hold for about 4s until the
LED indicator is solid red, and all parameters will be restored to
default settings.
(Behind the cover)
LED
Indicator
Solid Red: Camera starting up.
Slow-ashing Red: Disconnected from the network.
Fast-ashing Red: Camera exception (e.g. Micro SD card
error).
Solid Blue: App visiting camera.
Slow-ashing Blue: Camera running properly.
Fast-ashing Blue: Camera ready for Wi-Fi connection. (WiFi
version only)
Data Port If you purchased a PoE version of the camera, it is a PoE Port.
Please connect it to a PoE switch.
If you purchased a Wi-Fi version of the camera, it is a network Port.
Please connect it to a router using a network cable.
Micro SD
Card Slot
You can see it after opening the card cover. After inserting the card,
before rst use, please log in to the EZVIZ App to initialize.
Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store
or Google Play
TM
.
3. Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To nd
out if an update is available, go to the app store and search for "EZVIZ".
Connect to the Internet
1� If you purchased a Wi-Fi version of the camera
• Wired Connection: Connect the camera to a router. Refer to Option A.
• Wireless Connection: Connect the camera to Wi-Fi. Refer to Option B.
Option A: Wired Connection
1. Connect the power adapter cable to the camera’s power port.
2. Plug the power adapter into an electrical outlet.