Ezviz Mini 360 Plus User Manual

5
EN
Wall Mounting (Optional)
The camera can be mounted on the wall or ceiling.
• Make sure the wall is strong enough to withstand three times the camera's weight.
• The installation surface should be clean and flat.
1. (Optional) If you want to install the microSD card, insert the microSD card into the microSD card
slot on the rear side of the camera. Otherwise, you can skip this step.
2. Attach the supplied drill template to the place where you want to affix the camera.
3. (Optional) If the wall is solid, drill and insert three expansion screws.
4. Affix the camera base onto the template using the three metal screws.
5. Install the camera on the base, and turn it 15° to secure it.
6. Connect the power cable to the camera. If the camera was previously connected to the Wi-Fi
network, it will automatically connect to the same Wi-Fi network.
Solid Wall
Wooden Wall

Ezviz Mini 360 Plus Specifications

General

Type	IP security camera
Placement supported	Indoor
Connectivity technology	Wired & Wireless
Wide Dynamic Range (WDR)	Yes
Frequency band	2.4 - 2.4835 GHz
Cabling technology	10/100Base-T(X)
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Form factor	Spherical
Mounting type	Desk
Product color	Black, White
Maximum resolution	1920 x 1080 pixels
Supported video modes	720p, 1080p
Video compression formats	H.264
Supported graphics resolutions	1920 x 1080 (HD 1080)
AC input voltage	5 V
Power consumption (max)	6 W
Power over Ethernet (PoE)	-
Pan range	0 - 340 °
Tilt angle range	-10 - 80 °
Camera shutter speed	1/30 - 1/100000 s
Minimum illumination	0.02 lx
Sensor type	CMOS
Optical sensor size	1/3 \
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	0 - 95 %
Lens diameter	4 mm
Focus adjustment	2.2
LED type	IR
Night vision distance	10 m

Weight and Dimensions

Width	100 mm
Height	90 mm
Weight	220 g